Premium protection from salt spalling & freeze-thaw spalling. Superior protection for very porous building materials, including natural stone, which are exposed to saltwater or freeze-thaw conditions.

Benefits of Fortifier Plus™

• Fortifier Plus™ has 2 main uses:

  1. Premium protection from salt spalling and freeze-thaw spalling for softer, very porous natural stone, brick and concrete in a salt water or freeze-thaw environment (e.g. around a salt water swimming pool).

  2. Premium quality, breathable water repellent for terraces, paths, walls, cladding and pool surrounds which Nano consolidation of very porous stones can increase strength by up to 40%.

Suitable Surfaces

• Salt-water or mineral pool surrounds.

• Terraces, paths, walls, stone cladding, all pool surrounds - wherever premium water repellence is desirable.

• Horizontal and vertical surfaces, including building envelopes (verticals), saltwater pool surrounds, cladding, pavers, blockwork, brickwork.

• Appropriate for new and restored natural stone and other porous building materials, including: Travertine, sandstone, limestone, marble, precast concrete, cast stone, Saltillo, terracotta, grout, concrete pavers, concrete blockwork and very porous bricks.

PLEASE NOTE: For indoor and outdoor entertaining areas where oil repellence is needed, seal with Stain Protector™.

Appropriate for new and restored materials, including: Travertine, sandstone, limestone, precast concrete, cast stone, Saltillo, terracotta, grout, concrete blockwork and very porous bricks.

Premium, color enhancing, impregnating sealer for natural stone and polished concrete

Product Technical Benefits:

• Enhances/deepens the colour of the surface 

• Water and oil repellence 

• Semi-permanent, UV stable technology 

• Highly breathable, allows water vapor to escape freely and limits harmful moisture build-up inside the treated material.  

• Treated surfaces stay looking good for longer and are easier to clean. 

• 5 YEAR PERFORMANCE WARRANTY available when applied by an APPROVED APPLICATOR. 

NOTE: DO NOT mix Enhance+® New Formula with Enhance+®.

The product will NOT prevent surface etching (for e.g. from acidic rain), scuff marks or mechanical wear. Enhance+® New Formula repels water and oil, but not solvents, so solvent based materials, such as marking pen ink can still stain the treated surface, but will penetrate less and be easier to remove. All spills should be cleaned up immediately to minimize absorption, particularly in the first month after application while the product is still curing fully.

Enhance+® New Formula

Premium, colour enhancing, impregnating sealer for dense natural stone and polished concrete. Deepens colour and provides optimized oil and water repellence.

Impregnating sealer - world-leading protection for stone, pavers, polished concrete

• Stain Protector™ gives optimal stain protection by providing superior water and oil repellence.
• Stain Protector™ is suitable for most types of porous building materials, including: Natural stone, brick, terracotta, concrete paving and polished concrete.
• Stain Protector™ is suitable for indoor and outdoor surfaces, including: Floors, patios, kitchens, bathrooms, terraces, entertaining areas and pool surrounds (use Fortifier Plus for salt-water pool surrounds).
• Super-penetrating, permanent bonding technology for superior protection against efflorescence, picture framing, salt spalling, freeze-thaw spalling.
• Retains surface colour, finish and slip resistance if applied correctly.
• On outdoor surfaces, including natural stone, Stain Protector™ provides a very deep hydrophobic (water repellent) barrier which keeps water out of the pores near the surface of the material and reduces mould growth.
• Highly breathable, allows water vapor to escape freely, and limits harmful moisture buildup inside the treated material.
• Stain Protector™ is highly UV resistant, chemical resistant and heat resistant and stands up to commercial cleaning methods.
• Treated surfaces remain to look good for longer and are easier to clean.
• IMPORTANT: Chemforce™ is an Australian owned company with high quality labs and manufacturing factories and Stain Protector™ was developed and manufactured in our facilities in Sunshine West, Victoria, Australia.